【Scope of application】
It is suitable for measuring the thickness of various non-woven fabrics under specific pressure. It can be used by non-woven fabric industry, inspection department and scientific research unit. Below 20mm adopts a balance type nonwoven thickness tester; above 20mm adopts a needle tip type nonwoven thickness tester.
【Standards compliant】
GB/T24218.2-2009 Textiles Nonwovens Test Methods Part 2: Determination of Thickness
【technical parameter】
1. Foot area: 2500mm²;
2. Reference board area: 1000mm²;
3. It has a sample clamping device that can hang the sample vertically between the presser foot and the reference plate;
4. The elbow lever provides pressure: 0.02kPa;
5. Counterweight: 2.05g±0.05g;
6. Pressurizing screw: continuously adjust the position of the presser foot;
7. Pressurization time: 10s;
8. Balance benchmark monitoring: 0.01mm;
9. Measurement accuracy: 0.1mm;
10. Timing device: touch screen stopwatch display.
11. Touch screen display.
12. Size: 350*600*350mm
Service hotline：
Receipt mail：
