【Scope of application】
Used for tensile strength testing of various new building waterproof materials (including new waterproof coiled materials, cloth, paper, waterproof coatings, waterproof sealing materials, etc.) It can also be used to test the tensile properties of other non-metallic materials.
【Standards compliant】
GB 328. 9-2007-T Test method for building waterproofing membrane Part 9: Polymer waterproofing membrane Tensile
【Instrument features】
1. Force measuring accuracy: adopt domestic authoritative force sensor, tested and recommended by national authoritative department.
2. Controller (microprocessor) features: PHILIPS company 32-bit microprocessor control, super anti-interference ability, extremely fast, guaranteed sampling rate ≥1000 times/sec; and can process curves and reports at the same time.
3. Display features: display curve dynamic tracking (monitoring) test process, curve coordinate automatic zoom (no need for tester intervention), report and curve tracking display at the same time.
4. Operating features: menu-guided operation mode, fool-style operation characteristics, simple and easy to learn, stable performance.
5. Large data capacity: up to 500 consecutive tests.
6. Equipped with JiGao_Test expert test software to provide you with a test system that can quickly set up the test and use it very easily.
【technical parameter】
1. Test method: CRE test principle is measured, the whole process is controlled by a high-speed processor, and every moment of change (curve dynamic monitoring), breaking strength and breaking elongation (elongation) are recorded. , Time, frequency, etc.
2. Force measuring system: force sensor.
3. Test method: microcomputer control
4. Range: 500N/1000 N/2500N/5000N/10000N (optional)
5. Force measuring accuracy: ≤±0.02%F.S
6. Adjustment accuracy of clamping distance: ±0.1mm
7. Stretching speed: 0.001-1000mm/min digital speed regulation, error ≤±2% (arbitrarily set)
8. Gantry width: 420mm
9. Effective stroke: 1000mm
10. Elongation resolution: 0.001mm
11. Sampling frequency: 2500 times/sec
12. Holder: Waterproof coiled material fixture (optional for large deformation extensometer)
13. Maximum cumulative test times (maximum data capacity of continuous test): 5000 times (can be grouped arbitrarily)
14. Print: output print results in various forms
15. Power supply: AC220V±10％50Hz
16. Dimensions: 820×650×1750mm (L×W×H)
17. Weight: about 180 Kg
Service hotline：
Receipt mail：
